Home
Product Service
Solution
About us
News center
Project cases Technical Support
Home
Tmall Mall
Jingdong Mall
Product Service
SCS WEAK CURRENT WIRE
RVV PROTECTOR WIRE
RVVP PROTECTOR WIRE
RVS PROTECTOR WIRE
RVVS PROTECTOR WIRE
RVVSP PROTECTOR WIRE
RYWV PROTECTOR WIRE
SMART CABLING SYSTEM
SMART MANAGEMENT SYSTEM
ELECTRONIC PATCH PANEL
SCS OCTAGONAL POLE
MONITORING POLE SERIES
OCTAGONAL POLE SERIES
ROAD LIGHTING POLE SERIES
WATERPROOF TANK SERIES
Solution
About us
News center
Project cases
Technical Support
Intelligent Electronic Patch Panel Solution

The solution of intelligent electronic patch panel can replace the original patch panel into multimedia electronic patch panel without affecting the existing operation. Debugging can be carried out during working hours without affecting the management of working port and no dedicated jumper is needed to upgrade the old cabling system. Upgrade the traditional cabling system to the electronic distribution system,no need to re-wiring, re-cabling keystone jack and would not cut off the internet access.There are mainly 3 types: face to face type, replacement type and insertion type.

1. Value of AS series intelligent physical layer management system 

    Equipment topology and equipment monitoring

    Topological visual management 
    Powerful equipment management capabilities
    Remote management
    Comprehensive application service management

    


2.1  Solving solution ---- Types of management techniques
   

    Port type management techniques





Principle: Insert a sensor device in the wiring frame port, which can sense the insertion and pull-out of the jumper.

Advantages: low cost, intelligent realization of most functions, simple structure, no need for intelligent jumper, no need for device-side mapping distribution frame


limitations: the corresponding relationship cannot be automatically identified, it can only jump at the end of the electronic distribution frame, and it is best not to jump in the case of power failure.


   Link type management techniques

Principle: Insert judgment circuit contacts in the two wiring frame ports, and judge

Advantages:Using a special intelligent jumper connection: it can realize all the functions of the electronic distribution frame, can detect the corresponding relationship, regardless of power on or off, it can jump to the

Risk: the price is higher than the port type, the electronic distribution frame needs to be used in pairs, and must rely on 9-core intelligent jumper.

Port and link compatible type


Principle: Integrated port-type and pure-link technology, that is, implanting an induction device in the port, and implanting a link judgment circuit

Without risk: perfect electronic wiring frame system solution, realizing all functions of the electronic wiring frame system, good real-time,

2.2. Solution - The solution of the new wiring system is exactly the same as the installation of the traditional wiring frame. It can be debugged after the completion of this wiring project.

The undebugged electronic distribution frame system does not affect the operation of the entire network system.




2.3. Solution - Upgrade and Transformation of Old Cabling System
       No matter which manufacturer's wiring system you originally used, Schneider? Comp?
       Panda? Simon?   
       Anpu? We can upgrade your traditional wiring system to the electronic wiring frame system,
       so that you can enjoy the application results of the Internet of Things in the field of
       integrated wiring without re-cabling, re-playing modules, or even disconnection. We       
       guarantee that it will not affect your business
 Install the induction bar on the wiring rack,
       and connect the induction bar to the scanner on the rest day. Debugging can be 
carried out
       during working hours, but it does not affect your network operation port system does not
       need a special jumper. Use
 your original ordinary jumper.

Old cabling  system upgrade plan 2: replacement

We only need to replace your original distribution frame with our multimedia electronic distribution frame to debug it. It can be carried out during working hours without affecting the working port management without special jumpers.




The third upgrade plan of the old wiring system: plug-in

Inserting an electronic distribution frame between the original distribution frame and the switch for debugging can be carried out during working hours without affecting the working terminal.